|
Washing Machine for Steel Plants
Through our continues research and development efforts we are able to make Heavy-duty brushing machine. With the use of our brush & brushing machine, we gave been able to remove / reduce the black carbon suits and oil patch which is normally removed with the use of hazardous pickling process.
Our Field trail has proved that saving on pickling chemical cost reduction to the tune of 70% to 75% can easily be obtained by reducing concentration of chemical.
Again the total process becomes environmental friendly as you are working with less concentration which reduces chemical hazards to considerable extent.
Valgro-Fynex technical abrasive brushes can be used in a variety of applications to clean and finish HR or CR metal strip, sheets and coils in pickling, de-greasing, rinsing and cleaning sections.
The unique machine provides uniform brushing effect on wider face area for cleaining, washing and surface finishing operation. This Machine are designed to suit individual customer application and requirement.
Features & Benefits
Consistent Cleaning - Increase Productivity
Horizontal axis rotating and oscillating brushes
Wet operation
Adjustable brush speed (Optional),
Consistent brush abrasion
Adjustable conveyor speed (belt / roller)
Solid metal body construction (S.S. / M.S.)
Different brush grits combinations are possible to perform different surface treatment
| |
|
| Help to remove most common Problems |
2. Depth Oxide in Raw Material
3. Carbon Suit after Rolling
4. Oil Patch / Black Spots |
6. Mill Mark / Pitch Mark
|
|
|
| |
|
| Other Products for Steel Mill Applications |
| Wide Roller Abrasives Brush
Wiper (Skinpass) Bar
Abrasives Filament Hi-tech wire Brush
Mill Roll (Non-woven, PU and Rubber Coated) |
|
|
| |
|
|
| Model |
Washerman 1250 |
|
|
| Brush Station |
Total Dimensions
(H X W X L)) @ |
| Machine Weight @ |
| Working Width |
| Sheet thickness Min / Mix |
Brush Dimensions
(Od x Width x ID) |
| Brushing speed |
| Spindle Oscillation frequency |
| Conveyor width |
| Conveyor speed |
| Rinse water inlet / outlet |
| Electrical Connection |
| Electrical mains |
|
| Four station |
1300 mm x 2400 mm x
3500mm x (±10 mm) |
| 3500 Kg |
| 1270 mm |
| 0.8 to 15 mm |
| 350 mm x 1270 mm |
| Variable |
| Variable |
| 1300 mm |
| Variable |
| Available |
| 110 - 230 V, 50 - 60 Hz |
| 440 V, 50 -60 Hz |
|
|
|
|
|
|
