Perceptible Quality Enhancement in Cleaning / Finishing operation
"Valgro-Fynex" Wide face brushes made from Valgro heavy duty nonwoven material with high compress designe for large area surface preparation. They are ideally suited for flat surface. They provide uniform hairline finish, satin and matt finish on ferrous and Non-ferrous metal surface. They can use wet and dry application. Valgro-Fynex Brushes can allow you to use less chemical and heat with improve your surface cleanliness, Worker safety improves and waste disposal is reduced. Brushes can be used in solution with a ph of 2-10 on cleaning line.
Application :
Metal Strips Industries "Valgro-Fynex" Wide face brushes are ideally suited for flat surface. They provide uniform hairline finish, satin and matt finish on ferrous and Non-ferrous metal surface.
Performance Highlights :
Remove debris and contamination from surface to create a clean surface, generate a consistent anchor pattern to improve the surface for better coating adhesion.
Improve the surface appearance. Provide a consistent satin scratch pattern and other cosmetic finishes.
all of these advantage increase productivity and reduce costs.
| Diameter x width |
Hole Diameter |
Max RPM 1/min |
Coarse |
Medium |
Fine |
Super Fine |
NO.4 Finish |
| 300 x 1270 |
140 |
1200 |
WF60.12 |
WF40.12 |
WF47.12 |
WF51.12 |
WF04.12 |
| 350 x 1270 |
190 |
1200 |
WF60.14 |
WF40.12 |
WF47.14 |
WF51.14 |
WF04.14 |
| 400 x 1270 |
215 |
600 |
WF60.16 |
WF40.16 |
WF47.16 |
WF51.16 |
WF04.16 |
| 450 x 1270 |
255 |
600 |
WF60.18 |
WF40.18 |
WF47.18 |
WF51.18 |
WF04.18 |
|
| |
|
Suitable Machine :
Coil Finishing Machine, Brushing Machine, Flat part Surface finishing equipment.
Made with Order & Specification |
| |
Deburring/Polishing :
Laser Cutting, punching, shear cutting, laser oxide removal etc.
Polishing / Brushing :
Flat sheets, strips and coils,
Brush finish MATT,SATIN : Achieved by valgro nonwoven abrasive brush
Duplo Finish : develop by valgro duplo combi brush with coated abrasive belt and nonwoven material.
No.4 HAIRLINE finish : Achieve by Valgro combi brush or abrasive belt grit 120, 150, 220, 320 grit.
Blank & Coil Washing / Brushing :
after brushing the blank or Shrip is flushed again with washing medium on both side.
|
Product Availability
CRS, MED, FIN, SFN, KOMBI CRS, KOMBI FIN |
 |
|
|
| |
|
